- METAL ROOFING • MIAMI, FL
Metal Roofing Services in Miami, FL
Metal roofing services in Miami, FL cover new installations and replacements planned around your home, its roof design and the metal system you choose.
Click Construction & Roofing helps you compare the work for a new metal roof or a change from your current roofing system. Start with the property, the roof and the result you want.
Serving Miami 33165, Westwood Lakes, Westchester, Olympia Heights, Tamiami and Kendall.
- Home
- Metal Roofing
Request My Metal Roofing Estimate
Tell us whether you need a new installation or a roof replacement. Share your property address and current roof material.
- A system for your property
Metal Roofing Installation: Fit the System to the Home
A new metal roof needs a plan for the whole assembly. The panels, roof deck, layer beneath the panels and edge details must work together.
For a new home or addition, roof plans help define the slope, support and water paths. For an existing home, installation also needs a clear plan for the roof already in place.
- Confirm the roof areas and slopes.
- Review the panel profile, base metal and finish.
- Match clips, fasteners and flashing to the proposed system.
- Check roof openings, wall joints and drainage.
- Confirm the approvals and required inspections.
Planning a new home or addition? See our roof installation service for that project type.
Match the Roof Slope
Choose a metal system approved for the roof slope. A lower addition may need a different assembly.
Choose the Panel and Finish
Compare panel profiles, base metals and finishes for the home and its exposure.
Plan the Hidden Layers
The deck, underlayment, clips and fasteners form part of the roof system, even when they are out of sight.
Detail the Roof Connections
Review edges, valleys, vents and wall joints so the written plan covers more than the panels.
- Existing roof to metal roof
Metal Roofing Replacement: Account for the Roof Already There
Replacing a roof with metal starts with the current roofing system. That may be an old metal roof, tile or shingles. The work must account for removal, the deck beneath it and the new assembly.
Replacing Worn Metal
Leaks, corrosion or failed roof details need review before a full replacement is chosen. A limited problem does not always mean every panel needs to come off.
Changing from Tile or Shingles
A change to metal may alter attachment, roof edges and other details. Check the proposed system against the home rather than assuming the old layout can be copied.
Removal and Deck Condition
The old covering may hide damaged wood or past repairs. Agree on how those findings, added work and price changes will be reviewed before work proceeds.
Roof-Over Limits
Installing metal over an existing covering needs a project-specific review. Existing layers, deck attachment and local rules affect what is allowed. Do not assume a roof-over is an option.
Understand the Full Replacement
Our residential roof replacement page explains removal and replacement across roofing materials. This page focuses on choosing and installing the metal system.
Share the roof you have and the metal roof you are considering.
- Metal and local exposure
Miami Weather Changes the Metal Roofing Plan
The right metal roof depends on more than a color sample. Sun, rain, wind and site exposure affect the details to review before materials are ordered.
Salt Exposure and Compatible Parts
Steel, aluminum, coatings and fasteners have different use limits. Salt exposure can affect the choice. An inland home near Westchester should not be treated as though it has the same exposure as a home beside salt water.
Heat and Panel Movement
Metal expands as it heats up and contracts as it cools. The selected attachment system and trim details must allow the movement required by the panel manufacturer.
Rain and Safe Work Windows
Rain, lightning and strong wind can pause roof work. Discuss protection for unfinished areas and stored panels. Atlantic hurricane season runs June 1 through November 30, but weather can affect work outside those dates.
Panel Appearance
Flat panel areas can show waves, often called oil canning. Light, panel shape, the surface below and installation can affect the look. Discuss samples and have visible changes reviewed rather than assuming the cause.
- Your project steps
Turn Your Metal Roofing Choices into a Written Plan
Both installation and replacement need a clear scope. Confirm the steps that apply to your property before work starts.
1
Share the Property and Project
Provide the address, current roof material and project goals. Mention additions, leaks, solar panels and any roof plans you already have.
2
Compare the Proposed Assembly
Review the panel, base metal, finish, attachment method and layer beneath it. Confirm that the assembly suits the roof slope and applicable requirements.
3
Agree on Work and Responsibilities
Define removal work, deck repairs, permit tasks, inspection stages, access and cleanup. Set a written process for approving added work.
4
Install and Keep the Documents
The work follows the agreed scope and required installation details. Retain the product information, available inspection records and care instructions for the completed roof.
- Local approvals
Check the Miami-Dade Requirements for Your Metal System
Miami-Dade is within Florida’s High-Velocity Hurricane Zone, or HVHZ. The proposed metal roof needs applicable product approvals and installation details for the property.
A product approval is not permission to use a panel on any roof. Its limits, attachment details and the building’s wind requirements matter. Confirm the exact assembly, roof slope and required inspections.
A Miami mailing address does not identify the permit office. Some properties are in unincorporated Miami-Dade; others are within a city. Confirm the responsible building department and who will carry out each permit task.
Use the Miami-Dade roofing permit resources and Product Approval resources for local information. No metal roof makes a home hurricane-proof.
- Scope and pricing
Compare Estimates That Cover the Same Metal Roofing Work
Pricing is based on project scope. Roof size, slope, access, panel choice, removal work and deck condition can change the amount.
Ask the written estimate to identify:
- Panel profile, base metal and finish.
- Underlayment, clips, fasteners and flashing.
- Removal and disposal, when needed.
- Deck repairs and how added costs are approved.
- Edges, valleys, vents and wall connections.
- Permit and inspection responsibilities.
- Cleanup and excluded work.
Ask about any existing solar equipment before work is scoped. Future care should follow the selected products. Our roof maintenance page explains care for an existing roof.
- Records and nearby homes
Use Your Miami Roof Records to Start the Conversation
Past permits, inspection records, roof plans and repair invoices can provide useful background. They do not prove the current roof is sound.
Find the appropriate record search through Miami-Dade Online Services. Use the city’s records if the property is within a municipality.
Click Construction & Roofing is based at 10705 SW 52nd Terrace, Miami, FL 33165. We serve homeowners near Westwood Lakes, Westchester, Olympia Heights, Tamiami and Kendall. The roof details and property location guide the work, not the neighborhood name alone.
View our roofing projects and ask how a metal system could fit your home. Sandro Ruiz is listed as General Contractor on our team page.
- Your metal roofing questions
Questions About Installing or Replacing a Metal Roof
Yes. Installation describes putting the metal system in place. On an existing home, the project may also include removal and replacement of the old roofing. The written scope should explain both.
It may be possible, but the roof slope, support, deck condition and approved assembly need review. A change of material can require different attachment and roof-edge details.
Yes. New roof installation and reroofing require permits. The property location determines the building department, documents and inspections that apply.
Only if the slope and design suit the approved system. Do not assume a panel chosen for the main roof can also cover a lower addition.
Base metal, finish, salt exposure and compatible fasteners affect the choice. Review the product limits for the property rather than treating every Miami location as the same exposure.
Visible waves are often called oil canning. Panel shape, heat movement, the surface below and installation can affect the appearance. Have visible changes reviewed rather than assuming the cause.
Yes. Hidden deck damage or past repairs can change the scope. Agree on how findings, added costs and approval will be recorded before extra work begins.
Share the property address, current roof type and whether you need installation or replacement. Include available roof plans, past permits and information about solar equipment. You do not need to climb onto the roof.
- Your metal roofing request
Request My Metal Roofing Estimate
Tell us whether you are planning an installation or replacing an existing roof. Include your address, current roofing material and the changes you want to make. You do not need to climb onto the roof.
Clickconstructionusa@gmail.com
Call About Metal Roofing
General Contractor License
CGC1529325
Request My Metal Roofing Estimate
Use the existing form to share your metal roofing request. Mention installation or replacement in your project details.